تجميع الصفحة | اعتبار الصفحة الرئيسية | رأي كما تشاء
عضو عادي

هانغتشو QiBi إلكترونيات المحدودة

منتجات رئيسية هي : الطاقة أدى إنقاذ مصباح ، بقيادة مصباح ، بقيادة مصباح ، بقيادة مصباح ، مصباح السقف ، بانخفاض ضوء ، بقيادة مصباح الكأس!

أنواع المنتجات
  • ليس
بحث الموقع
 
ارتباط الصداقة
  • ليس
موقع حاليا:الصفحة الرئيسية » مركز الصحافة » الميزات والفوائد LED
تصنيف الصحافة
مركز الصحافة
الميزات والفوائد LED
تاريخ النشر:2011-02-13        مرات التصفح:124        عودة إلى الجدول

Determine the intrinsic characteristics of LED is ideal light source to replace the traditional light sources, it has a wide range of uses. تحديد الخصائص الجوهرية للالصمام هو مصدر الضوء المثالي لتحل محل المصادر التقليدية الخفيفة ، ولديها مجموعة واسعة من الاستخدامات.
Small صغير
LED is basically a very small chips are encapsulated in epoxy resin inside, so it is very small, very light. الصمام هو في الأساس يتم تغليف a رقائق صغيرة جدا في داخل راتنجات الايبوكسي ، لذلك هو صغير جدا ، وخفيفة جدا.
Low power consumption انخفاض استهلاك الطاقة
LED power consumption is very low, in general, LED's operating voltage is 2-3.6V. Operating current is 0.02-0.03A. That is to say: it does not exceed power consumption of 0.1W. LED من استهلاك الطاقة ومنخفضة جدا ، وبصفة عامة ، والجهد الصمام التشغيل الحالية 2 - 3.6V التشغيل هو 0.02 - 0.03A هذا هو يقول :.. لا يتجاوز استهلاك الطاقة من 0.1W.
Long life مدى الحياة
At the right current and voltage, LED service life of up to 10 million hours في الحق والجهد الحالي ، خدمة الحياة LED تصل إلى 10 مليون ساعة
High brightness, low-calorie عالية السطوع ومنخفضة السعرات الحرارية
Environmental Protection حماية البيئة
LED is made by a non-toxic materials, unlike fluorescent lamps containing mercury can cause pollution, while LED can also be recycled. يرصد بقيادة مواد غير سامة ، وعلى عكس المصابيح الفلورية التي تحتوي على الزئبق يمكن أن تسبب التلوث ، بينما يمكن أيضا أن الصمام يمكن إعادة تدويرها.
Durable دائم
LED is completely encapsulated in epoxy resin inside it than light bulbs and fluorescent tubes are strong. Light and no loose parts of the body, these features make the LED can be said is not easy to damage. يتم تغليف تماما LED راتنجات الايبوكسي في داخله من المصابيح الكهربائية وأنابيب الفلورسنت قوية. الخفيفة وعدم وجود أجزاء مفككة من الجسم ، وهذه السمات تجعل يمكن أن يكون الصمام وقال ليس من السهل أن الضرر.
LED Classification الصمام التصنيف
1. Divided by the color LED light 1. مقسوما على لون ضوء LED
Divided by the color LED light, can be divided into red, orange, green (and yellow segments, the standard green and pure green), blue and so on. In addition, some light-emitting diode contained in two or three colors of chips. مقسوما على لون ضوء LED ، ويمكن تقسيمها إلى اللون الأحمر والبرتقالي والأخضر (شرائح والأصفر والأخضر والأخضر الخالص القياسية) والأزرق وهلم جرا. وبالإضافة إلى ذلك ، فإن بعض الدايود باعث للضوء الوارد في اثنين أو ثلاثة ألوان من رقائق .
Light emitting diode based on doped or not doped at the scattering agent, colored or colorless, the various colors of light-emitting diodes can also be divided into colored transparent, colorless, transparent, colored and colorless scattering four types of scattering. Scattering of light-emitting diodes and used to make light. انبعاث ضوء الصمام الثنائي على أساس مخدر أم لا مخدر في كيل نثر ، ملونة أو عديم اللون ، ويمكن أيضا في ألوان مختلفة من الضوء الثنائيات يمكن تقسيمها إلى اللون ، عديم اللون شفافة ، نثر ، شفاف عديم اللون والملونة أربعة أنواع من نثر. تشتت الضوء الثنائيات والتي استخدمت لصنع النور.
2. LED features a glossy by sub- 2. الصمام ميزات لامعة من قبل الفرعي
LED features a glossy by cyclotomic lights, side lights, rectangular, surface light-emitting tube, side tubes, pipes and other surface mount micro. Divided by the diameter circular lights φ2mm, φ4.4mm, φ5mm, φ8mm, φ10mm and φ20mm and so on. Foreign φ3mm LEDs usually recorded as T-1; to φ5mm's recorded as T-1 (3 / 4); the φ4.4mm's recorded as T-1 (1 / 4). LED يتميز بواسطة أضواء لامعة cyclotomic ، وأضواء الجانب ، مستطيل ، سطح الأنبوب التي تشع ضوءا ، والأنابيب الجانبية ، والأنابيب وغيرها من سطح جبل الصغرى. مقسوما على مصابيح دائرية قطرها φ2mm ، φ4.4mm ، φ5mm ، φ8mm ، وφ10mm φ20mm وهكذا . φ3mm على المصابيح الخارجية المسجلة عادة T - 1 ، وسجل لφ5mm كما T - 1 (3 / 4) ، وφ4.4mm 'ق كما هو مسجل T - 1 (1 / 4).
Value by the semi-circle can be estimated angular size distribution of luminous intensity angle. ويمكن تقدير القيمة من قبل دائرة نصف حجم التوزيع الزاوي من زاوية مضيئة كثافة.
Angle from the luminous intensity distribution to be divided into three categories: زاوية من توزيع كثافة مضيئة في تقسيمها الى ثلاث فئات :
(1) high directivity. Generally pointed epoxy package, or package with a metal reflector cavity, without adding scattering agent. Half-value angle of 5 ° ~ 20 ° or less, with high directivity can be used as a local light source, or associated with the light detector to form an automatic detection system. (1) الاتجاهية العالية وأشار عموما حزمة الايبوكسي ، أو صفقة مع تجويف معدني عاكس ، دون أن يضيف وكيل نثر. نصف قيمة زاوية من 5 درجات يمكن استخدامها ~ 20 درجة أو أقل ، مع الاتجاهية العالية كمصدر الخفيفة المحلية ، أو المرتبطة ضوء كاشف لتشكيل نظام الكشف التلقائي.
(2) standard. Normally used for light, its half-value angle of 20 ° ~ 45 °. (2) القياسية. تستخدم عادة للضوء ، على نصف قيمة زاوية 20 درجة ~ 45 درجة.
(3) scattering type. This is the perspective of the larger light, half-value angle of 45 ° ~ 90 ° or more, a large amount of scattering agents. (3) نوع نثر ، وهذا هو المنظور من زاوية أوسع ضوء نصف القيمة ، 45 ° ~ 90 درجة أو أكثر ، وكمية كبيرة من وكلاء نثر.
3. Divided by the structure of light-emitting diodes 3. مقسوما على هيكل الضوء الثنائيات
Divided by the structure of light-emitting diodes have full epoxy encapsulation, epoxy encapsulation of metal base, ceramic base and glass epoxy encapsulated package structure. مقسوما على هيكل من الثنائيات الباعثة للضوء والتغليف الكامل الايبوكسي والتغليف الايبوكسي من قاعدة معدنية ، وقاعدة السيراميك والزجاج حزمة مغلفة هيكل الايبوكسي.
4. By light intensity and operating current points 4. بواسطة شدة الضوء ونقاط التشغيل الحالية
By light intensity and operating current divided ordinary brightness LED (light intensity 100mcd); the luminous intensity between the 10 ~ 100mcd called high-brightness light-emitting diodes. Normal operating current in the LED to a few dozen mA mA, and low current LED's operating current in the 2mA or less (normal LED brightness and the same). بواسطة شدة الضوء وتشغيل تقسيم العادية الحالية LED سطوع (شدة الضوء 100mcd) ، وكثافة مضيئة بين 10 ~ 100mcd التشغيل الطبيعي دعا عالية السطوع التي تشع ضوءا الثنائيات الحالية في الصمام لأمبير عشرة أمبير قليلة ، وانخفاض في الصمام الحالي. التشغيل الحالي في 2mA أو أقل (LED العادي سطوع ونفس).
Inaddition to the above classification, there are also classified according to the chip material and method of classification by function يناديتيون إلى التصنيف أعلاه ، هناك أيضا وفقا لتصنيف المواد رقاقة وطريقة التصنيف حسب الوظيفة