تجميع الصفحة | اعتبار الصفحة الرئيسية | رأي كما تشاء
عضو عادي

هانغتشو QiBi إلكترونيات المحدودة

منتجات رئيسية هي : الطاقة أدى إنقاذ مصباح ، بقيادة مصباح ، بقيادة مصباح ، بقيادة مصباح ، مصباح السقف ، بانخفاض ضوء ، بقيادة مصباح الكأس!

أنواع المنتجات
  • ليس
بحث الموقع
 
ارتباط الصداقة
  • ليس
موقع حاليا:الصفحة الرئيسية » مركز الصحافة » الصمام LED يسبب الضرر وسيلة لحماية الدوائر
تصنيف الصحافة
مركز الصحافة
الصمام LED يسبب الضرر وسيلة لحماية الدوائر
تاريخ النشر:2011-02-13        مرات التصفح:122        عودة إلى الجدول

White LED devices are voltage sensitive, in practical work is a maximum of 20mA of current, but often in use due to various reasons caused the current increase, if you do not take protective measures, this increase in current over a certain time after the LED will be damaged and amplitude. أبيض الأجهزة الصمام الجهد الحساسة ، في النشاط العملي هو الحد الأقصى ل20mA الحالية ، ولكن في كثير من الأحيان استخدام لأسباب مختلفة تسببت في الزيادة الحالية ، إذا كنت لا تتخذ اجراءات وقائية ، في هذه الزيادة الحالية على مدى فترة زمنية معينة بعد الصمام وسوف يكون معطوبا والسعة.
LED damage caused by main reasons: الصمام الأضرار الناجمة عن أسباب رئيسية :
① sudden increase in supply voltage. ① الزيادة المفاجئة في امدادات التيار الكهربائي.
② a component or printed circuit lines or other wires short-circuit LED power supply path to form a local circuit, the voltage increased to make this place. ② مكون أو خطوط أو أسلاك الدوائر المطبوعة الأخرى قصيرة الدائرة امدادات الطاقة LED الطريق لتشكيل الدوائر المحلية ، وزيادة الجهد لجعل هذا المكان.
③ an LED causes damage because of their quality and thus the formation of short circuit, the voltage drop to its original passed on to other LED. ③ ضررا أسباب الصمام بسبب جودتها وبالتالي تشكيل دائرة كهربائية قصيرة ، وانخفاض الجهد الأصلي لنقلها إلى الصمام الأخرى.
④ temperature inside the lamp, so that deterioration of the characteristics of LED. ④ درجة الحرارة داخل المصباح ، بحيث تدهور خصائص الصمام.
⑤ inside the lamp into the water, the water is conductive. ⑤ داخل المصباح في الماء ، والماء هو موصل.
⑥ When the assembly did not do the work of anti-static, so that the internal LED has been static electricity damage. Although the applied voltage and current values ​​are normal, but also easily cause LED damage. ⑥ عند التجميع لم يفعل عمل ذلك ، ومكافحة ساكنة أن الصمام الداخلي تم ثابت الضرر الكهرباء. وعلى الرغم من الجهد وتطبيق القيم الحالية طبيعية ، ولكن بسهولة أيضا تسبب ضررا الصمام.
So, how can I like the LED circuit protection? لذا ، كيف أحب حماية الدوائر LED؟
1. 1. Protection circuit with fuse (tube) مع دائرة حماية الصمامات (أنبوب)
As a one-time fuses, and the slow response, poor results, the use of trouble, so not suitable for LED lighting products fuse, because LED lights are now mainly works in the city's glory and the lighting project. It requires protection circuitry to be very harsh LED: When in excess of normal use of the current protection starts immediately, so that access to the power supply LED is off, LED and power supply can be protected, then the whole lamp to automatically restore the normal supply power, does not affect the LED work. Volume of the circuit can not be too much too complicated, the cost is even lower. So with the way the fuse is difficult to implement. ك الصمامات لمرة واحدة ، وبطء استجابة ، وسوء النتائج ، واستخدام من المتاعب ، لذلك لا تصلح للفتيل الصمام منتجات الإضاءة ، لأنه يتم الآن أضواء LED تعمل بشكل رئيسي في شهرة في المدينة ، ومشروع الإنارة. فهي تتطلب دوائر الحماية لل الصمام تكون قاسية جدا : عندما تتجاوز الاستخدام العادي من الحماية الحالية يبدأ على الفور ، حتى الوصول إلى إمدادات الطاقة الصمام هو إيقاف ، يمكن حماية الصمام وإمدادات الطاقة ، ثم مصباح كامل لاستعادة تلقائيا امدادات الطاقة العادية ، لا لا يؤثر على عمل الصمام. حجم الدائرة لا يمكن أن يكون الكثير من التعقيد ، وتكلفة أقل. حتى مع الطريقة الفتيل من الصعب تنفيذها.
2. 2. Use of transient voltage suppression diode (referred to as TVS) استخدام القمع عابر الجهد الصمام الثنائي (ويشار إلى TVS)
Transient voltage suppression diode is a form of high-performance diode protection device. When it was the reverse transient bipolar high-energy shock to the negative 12 power of 10 seconds, the speed of a very short time, high impedance between the poles themselves immediately reduced to low resistance, absorbing up to several kilowatts of power surge , the voltage between the poles of the voltage clamped at a predetermined value, the effective protection of the electronic circuit of precision components. Transient voltage suppression diode with fast response time, transient power, low leakage current, breakdown voltage deviation consistency, easier to control the clamping voltage, no damage to the limit, the advantages of small size. عابر ديود قمع الجهد هو شكل من أشكال عالية الأداء جهاز حماية الصمام الثنائي ، وعندما كان عكس القطبين عابرة ذات الطاقة العالية لقوة الصدمة السلبية 12 من 10 ثانية ، وسرعة وقت قصير جدا ، ومقاومة عالية بين القطبين أنفسهم فورا فرضت الجهد بين القطبين من الجهد لخفض مقاومة منخفضة ، واستيعاب ما يصل الى عدة كيلوواط من الطاقة زيادة في قيمة محددة سلفا ، وحماية فعالة من مكونات الدوائر الإلكترونية الدقيقة. عابر ديود قمع التيار الكهربائي ، وزمن استجابة سريع ، قوة عابرة ، وانخفاض التسرب الحالي ، والاتساق الانحراف انهيار الجهد ، وأسهل للتحكم في الجهد تحامل ، لا الأضرار التي لحقت الحد ، ومزايا الحجم الصغير.
However, in actual use to meet the requirements found in the voltage to find the value of TVS device is not easy. LED Light bead damage is mainly because the current chip had overheating caused by the Ambassador. TVS can detect over-voltage can not detect over-current. To select the appropriate voltage protection was very difficult to grasp, this device can not produce it would be difficult to use in practice. ومع ذلك ، في الاستخدام الفعلي لتلبية متطلبات وجدت في الجهد للعثور على قيمة الجهاز التلفزيونات ليست سهلة. الصمام الخفيفة الضرر حبة ويرجع ذلك أساسا في الشريحة الحالية قد الانهاك الناجم عن السفير. TVS يمكن الكشف عن أكثر من الجهد لا يمكن الكشف عن الإفراط الحالي لاختيار حماية الجهد المناسب كان من الصعب جدا فهم ، ويمكن هذا الجهاز لا ينتج أنه سيكون من الصعب استخدامها في الممارسة العملية.
3. 3. Select the self-recovery fuse حدد فتيل الذاتي الانتعاش
Resettable fuse, also known as polymer positive temperature thermistor PTC, is a polymer with conductive particles such as composition. After special processing, the conductive particles in the polymer chain in the form conductive path. When the normal operating current through (or components in a normal ambient temperature) is, PTC resettable fuse was low resistance state; when the circuit by abnormal over-current (or the temperature rises), the large current (or the environment temperature ) heat generated by the rapid expansion of the polymer, it cut off the conductive particles composed of conductive pathways, PTC resettable fuse high-impedance state; when the circuit over-current (over-temperature state) disappears, the polymer cooled, the volume back to normal, in which conductive particles constitute a conductive path again, PTC resettable fuse and was the initial low resistance state. In the normal operation of the heat pipe since the insurance recovery is very small, abnormal working conditions in the heat of its high resistance to large, also limits the current through it, and thus play a protective role. In the specific circuit, you can choose: Resettable الصمامات ، والمعروف أيضا بأنها إيجابية البوليمر حرارة PTC الثرمستور ، وهي جزيئات البوليمر مع موصل مثل التكوين ، وبعد معالجة خاصة ، والجسيمات موصل في سلسلة البوليمر في شكل مسار موصل ، وعندما التشغيل العادية الحالية من خلال (أو المكونات في وكان فتيل PTC resettable درجة الحرارة المحيطة العادي) هو ، وانخفاض مقاومة الدولة ، وعندما الدائرة الشاذة التي الإفراط الحالي (أو ارتفاع درجة الحرارة) ، والحرارة (أو درجة حرارة البيئة) الحالي الكبيرة الناتجة عن التوسع السريع في البوليمر ، وذلك بقطع قبالة جزيئات تتكون من مسارات موصل موصل ، PTC resettable فتيل عالية مقاومة الدولة ، والبوليمر عند الإفراط في الدوائر الحالية (أكثر من درجة حرارة الدولة) يختفي وتبريده ، وحجم مرة أخرى إلى وضعها الطبيعي ، والتي تشكل الجزيئات موصل طريق موصل مرة أخرى كانت المؤسسة العامة للاتصالات فتيل resettable والدولة الأولي انخفاض المقاومة ، وفي التشغيل العادي للأنابيب الحرارة منذ استرداد التأمين ، صغيرة جدا غير طبيعي ظروف العمل في حرارة عالية لمقاومته كبيرة ، ويحد أيضا من خلال ذلك التيار ، وبالتالي . تلعب دورا وقائيا في دائرة معينة ، يمكنك الاختيار من بينها :
① shunt protection. LED lamp is generally divided into many branches in series. We can add in front of each branch separately protected components of a PTC. This approach has the advantage of high accuracy, protection and good reliability. وتنقسم عموما ① حماية تحويلة. مصباح LED في العديد من الفروع في سلسلة ، ونحن يمكن ان تضيف أمام كل فرع على حدة مكونات المحمية من المؤسسة العامة للاتصالات ، وهذا النهج في الاستفادة من الدقة العالية والحماية والموثوقية جيدة.
② overall protection. In all preceded beads of light received a PTC component, the entire light protection. The benefits of this approach is simple and does not account for volume. For civilian products, such protection results in actual use, or satisfactory. ② الحماية الشاملة ، وفي جميع حبات سبقت تلقى الضوء مكون المؤسسة العامة للاتصالات ، وحماية الضوء كله. فوائد هذا النهج هو بسيط ولا حساب وحدة التخزين. بالنسبة للمنتجات مدنية ، ونتائج مثل هذه الحماية في الاستخدام الفعلي ، أو مرضية.